TURN YOUR FACTORY RADIO INTO AN AFTERMARKET DREAM
The state-of-the-art FiX digital signal processor (DSP) is engineered to deliver world-class sound from factory audio systems, without replacing the OEM source unit. FiX 82 and FiX 86 automatically correct time-delayed factory outputs prior to signal summing and EQ correction.
WORLD-CLASS SOUND FROM YOUR FACTORY RADIO
USER-ADJUSTABLE 10-BAND GRAPHIC EQUALIZERS
FiX AND SUM OEM SIGNAL
30-SECOND, SINGLE-BUTTON CALIBRATION
2 OR 6 RCA OUTPUTS
2-YEAR WARRANTY
WHAT YOU’LL LOVE
FiX OEM SIGNAL
With a powerful 24-bit DSP processor and quad 1/3 octave equalizers on board, complex factory signals are combined and level matched automatically into flat, full-range stereo signals.
EASY CALIBRATION
Unlike typical OEM interface products, the FiX DSP automatically corrects time-delayed factory outputs prior to signal summing and EQ correction. Calibration takes just a single button press and about 30 seconds to complete, with no special equipment needed.
SOFTWARE DIAGNOSTIC
Using the TüN® software via USB, you can access a complete suite of diagnostic panels that show the frequency response of input signals as well as the corrected outputs. Adjustments can be made to input polarity, muting and filtering, and new calibrations can be initiated from the PC as well.
ANY OEM INPUT
The 8 channel inputs accept virtually any OEM analog audio signal — from low-voltage, line-level to high-power, amplified speaker-level outputs (up to 30-volt RMS).
POWER CONTROLLER
The FiX processor is designed to perform as a turn-on and turn-off controller for the aftermarket components in your system. There are three selectable options to control the method of turn-on: +12-volt remote, signal sensing or DC offset.
USER-ADJUSTABLE EQ
By clicking on the Tune tab of the TüN interface, you can also access four user-adjustable 10-band graphic equalizers to fine-tune the output signals.
FiX PROCESSOR TECHNOLOGY
JLID™ PROTOCOL COMMAND
This proprietary JL Audio protocol provides FiX and TwK® processors with the connection of a wired controller.
DIFFERENTIAL-BALANCED INPUTS
Combating induced cable noise, this technology allows for the use of conventional RCA cables while delivering many of the benefits of a true balanced connection and accepting a wide range of input signal levels.
Specs
General |
|
| Warranty | 2 years |
|---|---|
| Input channels | 8 |
| Output channels | FiX-82: 2 FiX-86: 6 (Front/Rear/Sub Output Pairs) |
| Physical dimensions (Height) | 1.85″ (47 mm) |
| Physical dimensions (Width) | 4.29″ (109 mm) |
| Physical dimensions (Depth) | 6.14″ (156 mm) |
| Weight |
2.58 lbs (1.17 kg) |
| Power supply type | Regulated DC-DC SMPS |
| Operating voltage | 10-16 VDC |
Audio |
|
| Signal-to-Noise Ratio @ 4 V (RMS) | 96 dB |
|---|---|
| THD+N @ Rated Power | 0.02% (20 Hz-20 kHz) |
| Input voltage range | 250 mV-30 V RMS |
| Minimum input voltage | 10 mV RMS |
| Input level setting | Fully automatic |
| Analog output | Unbalanced, stereo RCA jacks |
| Digital output | FiX-82: Optical (Toslink) output (S/PDIF) |
| Output impedence | 450 Ω |
| Current consumption (Standby) | <1.5 mA |
| Current consumption (Idle) | 0.7 A |
| Fuse rating | 1 A |
Signal Processing |
|
| Audio resolution | 24 bit/48 kHz |
|---|---|
| Number of EQ bands | 30 x 2 Channels |
| EQ resolution | 1/3 octave (25 Hz-20 kHz) |
| Remote level control | FiX-82: Optional (DRC-100) FiX-86: Optional (DRC-100 or DRC-200) |
| Remote level modes | Master Volume Control, Handsfree Optimization, LED Status Reporting (DRC-200 adds Subwoofer Level Control) |
Engineering enhancements are ongoing and may not be reflected in the pictures, videos and specifications.
Reviews
There are no reviews yet.